6600 HF – High Flow
The 6600 High Flow Brush Wolf model will slash a 66″ wide path. All high flow models include a case drain to relieve excess pressure build-up and protect hydraulic motor life. The suction and long-lasting high tempered steel blades will lift and mulch to blast through brush and saplings up to 4″. A balanced stump jumper protects the gearbox and prevents vibration. A welded collar on the bottom of the deck helps prevent damage to the gearbox. Galvanized 5/16″ safety chains on the front and rear protect against flying debris and aid in mulching. The front chains are replaceable. The solid one piece of formed 1/4″ steel deck will stand up to your workload for years to come. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment.
Brush Wolf Skid Steer Series
Each Brush Wolf model is paired with the correct hydraulic motor and right angle gearbox to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter you’d prefer, which should be slightly wider than your loaders wheel base. The auxiliary hydraulic flow required for the High Flow model is between 26 – 40 gallons per minute. You’ll find the right Brush Wolf model to make the most of your skid steers power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future.
All models are designed, fabricated, powder coated, assembled and tested in Crosslake, Minnesota. Each Brush Wolf model comes standard with hoses, couplers and gearbox seal guard included. Experience the power, performance and reliability from Brush Wolf products. Designed to exceed your expectations.
Custom colors available for additional charge.
- Max Cutting Capacity: 4"
- Cutting Width: 66"
- Auxiliary Hydraulic Flow: 26-40 GPM
- Weight: 1,114 lbs
- Overall Length: 78.250"
- Overall Width: 67.750"
- Blades: (2) .500'' x 4.000" (High Strength, Updraft)
- Blade Carrier Type: 1.000'' Bar Welded to .313" Spun Formed Pan
- Blade Rotation: Counter Clockwise
- Deck Thickness: .250"
- Motor Protection: Pressure Reliefs
- Drive Protection: GRD-2 Bolt (Shear Bolt)
- Motor/Gearbox Coupler: Machined Steel
- GPM - SS: 26-29 GPM
- GPM - SS: 30-40 GPM
- Hydraulic Hose with Protective Wrap: Standard 78" - Custom lengths available upon request
- Use: Extreme Duty – clearing of up to 8” diameter brush
- Use: Heavy Duty – clearing of up to 4” diameter brush
Manufactured by Cross-Tech Manufacturing
ISO 9001 Certified